Advertisement
90/301
Bosch Rexroth AG
Operation Modes
Rexroth IndraMotion MTX 11VRS Standard NC Operation
The MDI-Editor can process up to 100 NC blocks. If the number of lines exceeds
the number that can be displayed in the MDI-Editor, a scroll bar appears for
orientation. The number of blocks in the MDI-Editor is checked while pasting
from the clipboard and when pressing <F4 Apply MDI block>. If the number of
NC blocks exceeds 100, a note is displayed in the status line while pasting from
the clipboard (<Ctrl>+<V>). When <F4> is pressed, a message window with
the number of permitted and existing blocks appears.
The MDI-Editor can adopt two different states:
●
Editing permitted:
light blue background. This permits all ordinary keyboard shortcuts of ed‐
itors (<Ctrl>+<C>, <Ctrl>+<V>, <Ctrl>+<X> etc.).
The control is in the "Inactive" state.
●
Editing is not permitted:
gray background.
The control is in the "Ready", "Running", "Stopped" or there is an error
state.
Fig.6-15:
Editing permitted
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
