Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Error message number and message
text number
(#32)
The current NC mode cannot be deter‐
mined.
(INcsChannel::GetNcMode)
(#50)
The depth of the call stack cannot be de‐
termined.
(IProgChain::GetProgChainDeep)
(#51)
The parameters of a subroutine cannot
be determined.
(IProgChain::GetSubProgLevel)
(#80)
The connection to the NC was interrup‐
ted.
(#69)
Failed to establish a connection to the
NC.
(INcConnect::Connect)
(#33)
The requested NC mode cannot be set.
(INcsProcess::SetOpMode)
Abbreviations
11.2
Energy Monitor
11.2.1
Overview
Purpose of the Energy Monitor
Cause
Timeout too short.
Timeout too short.
Timeout too short.
The connection to the NC was interrup‐
ted.
Failed to establish a connection to the
NC.
NC mode was changed (e.g. by another
application).
Fig.11-7:
Message reasons are: either OLE error, software problems of the NC
application or MTX-Analyzer application or installation problems
NC
Numerical Control (System)
CNC
Computerized Numerical Control
CPL
Customer Programming Language
PC
Personal Computer
DDP
Desktop Development Platform
SCP
Scalable Communication Platform
With the energy monitor, the energy consumption of a machine as well as of
individual function modules (electric drives and auxiliary equipment (hydraulic
pumps, cooling lubricant system etc.) are summed up and monitored over de‐
fined time spans.
The energy monitor is part of the MTX interface.
Bosch Rexroth AG
Extended Functionality
Recommended to the user
Close and restart the application.
Close and restart the application.
Close and restart the application.
Close the application, restart it and rees‐
tablish the connection.
Close the application, restart it and rees‐
tablish the connection.
Continue and set the desired NC mode
after a new selection and after starting
the required flow program.
245/301
Advertisement
