Advertisement
180/301
Bosch Rexroth AG
Tool Management
<F3 Import list>
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Fig.8-24:
Selection dialog for the single tool import function
The function can also be opened via the following menu function in the default
configuration Edit ▶ Import single tool .
After an XML file has been selected in the NC file system (for example, a mount
directory would be a good idea), it is read and then written to the database table.
In the following dialog , the user can decide whether
●
all the data of the data record,
●
only tool data,
●
only location data
are to be imported.
Fig.8-25:
Selection dialog for the Import function
The function can also be opened via the following menu function in the default
configuration Edit ▶ Import list .
When importing a tool list, ensure that the XML document file to be
read is suitable for the configuration of the database table in terms
of the number of sectors and locations and the data structure.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
