Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Logo Area
Structure and Contents
NC Kernel: Diagnostic Monitor
The following table contains a description of the message symbols that are
displayed depending on the configuration.
Meaning
Symbol
Explanation
Error
The message indicates an error.
Warning
The message indicates a warning.
Note
The message indicates a note.
Fig.4-12:
Message symbols
In addition to the "Rexroth MTX" logo, the logo area contains an animation
started in the waiting state of the interface (e.g. while opening an editor) and
an animation activated when the action recorder starts recording.
Fig.4-13:
Logo area
The NC kernel diagnostic monitor and the system load display can be indicated
via the logo.
The NC kernel diagnostic monitor displays the load distribution of the individual
NC kernel task. Thus, it can be efficiently identified if there is a system overload
due to an incorrect user configuration or programming.
The diagnostic monitor is displayed when double-clicking on the logo.
The "Diagnostic monitor" function can either be linked via a shortcut or a func‐
tion key.
The load distribution of the following tasks is displayed in %:
●
Interpolation and SERCOS (IPO)
●
PLC runtime
●
NC and CPL block processing (SAV/CPL)
●
free capacity (IDLE)
●
Remaining time of all remaining tasks such as the communication, data‐
base accesses, file server (REST).
Fig.4-14:
Diagnostic monitor
The NC kernel diagnostic monitor can negatively influence the run‐
time behavior of the operating machine. Thus, the diagnostic tool
should be switched off after the commissioning. A respective note
is cyclically output in the status line.
Bosch Rexroth AG
31/301
Operating Elements
Advertisement
