Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
5.5.3
Deactivating Winlock
5.5.4
Closing the User Interface
5.6
Overview on Active Corrections
5.6.1
Usage
Integration of the application "Over‐
view on active corrections" in the
operating desktop
Winlock is deactivated when an authorized user logs in.
When an attempt is made to close the user interface, it is checked whether the
logged-in IndraWorks user has the required authorization. If not, the user in‐
terface cannot be closed and a corresponding message window is displayed.
All correction values used in the NC are displayed in different screens.
The application comprises four screens with the following displays
●
Correction overview 1
–
Zero offsets
–
Tool corrections
●
Correction overview 2
–
Input tools
–
Program coordinates
–
Placements
●
Tool correction register
●
Precision corrections
The display is assigned to the operating area <OP3> "Machine". Pressing
<F4> "Overview on active corrections" starts the application.
The display is an application with an individual F-key assignment.
The menu and the headline are hidden.
Bosch Rexroth AG
General Operation and Visualization
69/301
Advertisement
