Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
1
Introduction
1.1
About this Documentation
1.1.1
Purpose
1.1.2
Structure
1.1.3
Notation, Fonts, Symbols
Keys on the keyboard and on the
operator panel
Buttons on the user interface
Menu Sequences
1.2
Prerequisites
This documentation describes the operation of the standard user interface of
the Rexroth IndraMotion MTX NC control .
This documentation is a part of the complete documentation for the Rexroth
IndraMotion MTX, refer to the following table.
The document is structured according to the procedures. The description of the
individual functions corresponds to their operation. General operating instruc‐
tions come first.
The following notations are used in this documentation to actuate operating
elements (buttons, keys):
Keys on the keyboard and on the operator panel are shown in angled brackets
<>, e.g. pressing the enter key by <Enter>.
Keys that are pressed in sequence are separated by a comma, e.g. <1>, <2>,
<Enter>.
Keys that are pressed simultaneously are combined using a plus symbol, e.g.
<Ctrl>+<Alt>+<Del> or <Shift>+<Enter>.
Buttons in the dialogs of user interface are highlighted by quotation marks, e.g.
"OK" or "Cancel".
To display menus, the individual sequential menu items are highlighted in bold
and connected by triangles. For example, to go to the menu item "Save" in the
menu "File": File ▶ Save.
To operate the standard user interface of the Rexroth IndraMotion MTX ac‐
cording to this documentation, the control must be configured and commis‐
sioned.
The default settings of the dialogs as delivered are described. For further con‐
figuration
options,
DOK-MTX***-STARTUP*V11-CO01-EN-P, R911329959.
Bosch Rexroth AG
see
the
documentation
11/301
Introduction
"Commissioning",
Advertisement
