Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Structure of the default channel
window
Structure of the compact channel
window
Structure of the default channel in‐
formation
Structure of the compact channel
information
Display of the Channel Waiting
The focus is always on one channel window. F-keys act on this window. It is
marked by a light blue background and a dark blue frame (2).
When the channel dialog is called, the active channel is focused.
The displaying variant can be switched by pressing <F8 View>.
The variant selected last is maintained after the control is switched off.
Fig.9-4:
Default channel window
Fig.9-5:
Compact channel window
Each channel window contains:
●
channel information (1)
●
errors, warnings and notes of the channel (cancellation of the sum signal
for the machine status area) (4)
●
display of the active NC program name (2)
●
display of the last NC notes (3)
Fig.9-6:
Default channel information
The default channel information has the same structure and contents as the
channel-specific part of the machine status area.
Fig.9-7:
Channel information
In the compact display, the channel information does not show any text for the
operating mode and the channel status.
The states "Test mode", "Optional stop" and "Skip NC block" are not shown in
this display.
States
Bosch Rexroth AG
191/301
System Switching
Advertisement
