Bosch Rexroth IndraMotion MTX 11 VRS Applications Manual page 105

DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
"Active ZO database" window
Fig.6-32: "Active ZO database"
In this window, the active zero point offsets of the other zero point databases
can be selected/deselected individually.
"Direction of correction" window
Fig.6-33: Direction of correction
In this window, changes in the direction of correction of the length correction
values (tool corrections and D-corrections) can be set. The calculation specified
by the machine parameters is preset.
Settings outside the active plane have to be used with utmost care!
Bosch Rexroth AG 103/301
Operation Modes