176/301
Bosch Rexroth AG
Tool Management
<F4 Move>
Copy Tool
Rexroth IndraMotion MTX 11VRS Standard NC Operation
The <F3 Delete tool> function resets all data elements indicated in
the data scheme as tool data, i.e.
●
numeric values are written with "0",
●
Boolean values are set to "FALSE",
●
strings are written with "empty string".
This function also exists as a PLC function.
The following box for selecting the sector and location provides the user with a
free data set / tool storage position as a target position for offsetting a tool data
record.
Fig.8-19:
Selection box with sector/location to offset a tool
The function can be opened via the following menu function in the default con‐
figuration Edit ▶ Move tool .
The "Offset tool" function moves all data elements indicated in the
data scheme as tool data to an available location in the database
table.
This function also exists as a PLC function.
Via the menu bar Edit ▶ Copy tool , the "Copy tool" function can be activated
as interface function only. The following box for selecting the sector and location
provides the user with a free data set / tool storage position as a target position
for the duplicated tool.
Fig.8-20:
Selection box with sector/location to copy a tool
The function can be opened via the following menu function in the default con‐
figuration Edit ▶ Copy tool .
The "Copy tool" function duplicates all data elements indicated in
the data scheme as tool data to an available location in the data‐
base table.
This function also exists as a PLC function.
DOK-MTX***-NC*OP***V11-AP01-EN-P