Advertisement
154/301
Bosch Rexroth AG
Programming
Retrieval from the MTX Navigator
Retrieval from the
D-Correction Editor
Using Table Templates
<F2 Add correction set>
<F3 Remove correction set
Rexroth IndraMotion MTX 11VRS Standard NC Operation
tion table has one D-correction ("D1"). Alternatively, any D-correction table can
be used as the template for creating a new table.
1.
Select the directory in which the new D-correction table should be created
in the MTX Navigator. Use the mouse or the <cursor> keys.
2.
Press <F2 New> and then <F6 D-corrections> in the sublevel of the F-
keypad.
– or –
Select New ▶ D-corrections in the context menu.
A dialog (see
fig. 7-33 " dialog for creating new D-correction table" on page
154) to create a new D-correction table opens (continue with point 3).
1.
Press <F8> to switch to the second F-keypad and click on <F2 file...> to
switch to the file functions.
2.
Press <F2 New...>.
A dialog for creating a new D-correction table opens (see
for creating new D-correction table" on page
Fig.7-33:
dialog for creating new D-correction table
3.
Enter the name of the D-correction table. An automatically generated table
name is filled in by default.
4.
Close the dialog with "Ok".
A D-correction table is created and is opened in the D-correction editor.
Proceed as follows to use any D-correction table as template:
1. Dialog New (see
fig. 7-33 " dialog for creating new D-correction table" on
page
154) as described above.
2. If necessary, enter a new name for the D-correction table.
3. In the dialog New select the field "Template".
The entry field for the name of the template (default: "DC1.dct)" is activa‐
ted. If the default "DC1.dct" template is not used, a name with the path
information of another D-correction table can be entered here.
If a table name is entered without path information, the template is sought
in the path "/database".
4. Acknowledge the entry by pressing the "Ok" button.
The new table is opened in the D-correction editor. The number of D-cor‐
rection sets and D-correction values is adopted from the given template.
Functions on the Main Level of the D-Correction Editor
With <F2 Add correction set>, new D-correction data sets can be added. New
data sets are attached to the end of the table.
D-correction data sets are assigned running numbers (D1-D99).
<F3 Remove correction set> removes the last D-correction data set.
DOK-MTX***-NC*OP***V11-AP01-EN-P
fig. 7-33 " dialog
154).
Advertisement
