Improper use of these components, failure to follow the safety instructions in this document or tampering with the product, including disabling of safety de‐ vices, could result in property damage, injury, electric shock or even death. R911374765_Edition 01 Bosch Rexroth AG...
High housing voltage and high leakage current! Danger to life, risk of injury by electric shock! ● Before switching on and before commissioning, ground or connect the components of the electric drive and control system to the equipment grounding conductor at the grounding points. Bosch Rexroth AG R911374765_Edition 01...
Do not throw batteries into open flames. ● Do not dismantle batteries. ● When replacing the battery/batteries, do not damage the electrical parts installed in the devices. ● Only use the battery types specified for the product. R911374765_Edition 01 Bosch Rexroth AG...
These components are not provided for use in a public low-volt‐ age mains supplying residential areas. If these components are used in such a mains, high-frequency interference is to be expec‐ ted. This can require additional measures of interference suppres‐ sion. Bosch Rexroth AG R911374765_Edition 01...
Short circuit current rating SCCR A rms 42000 3x AC 380…500 Rated input voltage, power LN_nenn Tolerance rated input voltage U ±10 Mains frequency 50...60 Tolerance input frequency ±2 Rated input current 12.0 Branch circuit protection fuse R911374765_Edition 01 Bosch Rexroth AG...
Page 10
● Output voltage: DC 24V ● Output current: ≤ 40 A For power supply units with output current > 40 A: install UL- listed fuses for limitation to 40 A Tab. 2-1: KMV - UL ratings and dimensions Bosch Rexroth AG R911374765_Edition 01...
Field wiring material (material; Cu; 60/75° C; 1 conductor temperature; class) Output current 12.0 Power dissipation at continuous current and continuous DC bus Diss_cont power respectively 1) 2) 3) Housing dimension; see also related dimensional drawing Bosch Rexroth AG R911374765_Edition 01...
Page 15
42000 rms symmetrical amperes Copper wire; PVC-insulation (conductor temperature 90 °C; ≤ 40 °C) in accordance with NFPA 79 chapter 12 and UL 508A chapter 28 Tab. 2-2: KMV - UL ratings and dimensions R911374765_Edition 01 Bosch Rexroth AG...
Page 20
Power Supply Basic PSB‑20 Functions In the document typecodes, "xx" is a placeholder for the current edition of the documentation (e.g.: RE02 is the second edition of a Reference Book) Tab. 3-3: Documentations – firmware Bosch Rexroth AG R911374765_Edition 01...
UL: Branch circuit protection must be provided in accordance with the Manu‐ facturer Instructions, National Electrical Code and any additional local codes. CSA (for Canada): Branch circuit protection must be provided in accordance with the "Canadian Electrical Code, Part I". Bosch Rexroth AG R911374765_Edition 01...
Mains contactor control and XG34 feedback contacts (KNK03) Second connection point of equipment grounding con‐ ductor RKH0800 cable connects KMV to KNK RKH0801 cable connects KMV to KNK RKB0054 cable Tab. 4-2: KMV03 connection points R911374765_Edition 01 Bosch Rexroth AG...
Page 24
XG14 XD10 Customer assembles the cable (HAS05.1-020 accessories re‐ quired) XD13 RKB0054 Ready-made hybrid cable depending on the desired outgoing directions of the hybrid cable at the connection points X103.1 and X103.2 Tab. 4-4: Cable Bosch Rexroth AG R911374765_Edition 01...
Page 25
For Rexroth motors with data memory in the motor encoder, such as MSK, the motor overload protection level is set automatically while connecting the motor to the drive. There is no adjustment necessary. Otherwise refer to the Rexroth firmware documentation. R911374765_Edition 01 Bosch Rexroth AG...
22/29 IndraDrive Mi KMV03 Distributed Supply Unit KNK03 Distrib‐ uted Mains Filter Instructions for use 4.5.2 KNK03/KMV03 connection diagram Mains voltage XD1.2 Output to load KMV03 (XD1, mains voltage) XD10 Control voltage (24 V) Bosch Rexroth AG R911374765_Edition 01...
Page 27
IndraDrive Mi KMV03 Distributed Supply Unit KNK03 Distrib‐ 23/29 uted Mains Filter Instructions for use Mains choke temperature contact XG14 Mains voltage synchronization XG34 Mains contactor control and feedback contacts Ready-made hybrid cable Fig. 4-1: KNK03/KMV03 connection diagram R911374765_Edition 01 Bosch Rexroth AG...
Detailed description of malfunction and circumstances ● Type plate specifications of the affected products, in particular type co‐ des and serial numbers ● Your contact data (phone and fax number as well as your e-mail ad‐ dress) R911374765_Edition 01 Bosch Rexroth AG...
Page 30
26/29 IndraDrive Mi KMV03 Distributed Supply Unit KNK03 Distrib‐ uted Mains Filter Bosch Rexroth AG R911374765_Edition 01...