Advertisement
164/301
Bosch Rexroth AG
Tool Management
Diameter Entry
Subtracting Values
Arithmetic operations
8.2.2
Function Keys in the Tool Management
F-keypad
<F2>
<F3>
level
Insert tool
Delete tool
Level 1
Export list
Import list
2. Level
F-keypad
<F2>
<F3>
level
Sector 1
Sector 2
1. Level
8.2.3
M Keys for Tool List Display
Rexroth IndraMotion MTX 11VRS Standard NC Operation
If input mode "Additive" is activated and if diameter input for the selected data
element in the scheme was permitted using data attribute "ETA = DI" and if the
ID for diameter entry (ToolCatalog/TlTech/TlType/CoTo/DIA) has been set in
the tool catalog for the tool to be edited, additive value entry occurs as a diam‐
eter value, i.e. half of the entry value is added.
Additive value entry is not intended to be used for every cell; it can
be specified in the scheme file. Whether additive value entry is ac‐
tive for the selected cell can be recognized by the text "ADD" in the
status line.
To subtract a value from an existing value, a value with a leading minus sign
has to be entered when "Additive value entry" is active.
Simple arithmetic operations with several levels of parentheses can also be
carried out when entering data in the "Additive value entry" mode.
When the "Tools" operating range is entered, the 1st level of the F-key pads of
the tool list is retrieved as the uppermost F-keypad (default condition). The 1st
level is defined in file "HMI.FKeys.ToolmanList3.xml", the 2nd in file
"HMI.FKeys.ToolmanList2.xml". Both can be modified by the user in the F-key
configurator of IndraWorks Engineering.
<F4>
<F5>
Edit tool
Import tool
Define filter
Fig.8-4:
Function keys in the tool table editor
Press <F8> to switch between the levels.
Press <F9> to activate the user-configurable F-keypad for sector selection:
<F4>
<F5>
Sector 3
All tools
Fig.8-5:
User function keys in the tool management
It is also possible to define your own user screen as the entry screen for the
operating range. Upon delivery entry occurs directly via the tool list selected
last.
In the default configuration, all list displays have their own M-keypads with the
following functions:
M-key
Function
<R1>
Wear data display
<R2>
Geometry data display
<R3>
Status data display
DOK-MTX***-NC*OP***V11-AP01-EN-P
<F6>
<F7>
Entry addi‐
Filter active
tive
<F6>
<F7>
<F8>
<F8>
<F9>
Sector
se‐
lection
Sector
se‐
lection
<F9>
Advertisement
