Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
System Area
4.6.2
Function of the Status Line
This field does not exist in every application.
●
Status symbol field [4]
A status can be indicated here using a symbol.
This field does not exist in every application.
The system area displays the following information:
●
List of open applications in this operating area [5]
All open applications are displayed here. The associated window can be
activated by clicking the corresponding field.
●
Currently set language [6]
The status field displays simple status messages.
In addition, extended information can be displayed, e.g. if an action could not
be carried out because certain boundary conditions were not complied with.
Fig.4-17:
Status line with informational message
In case of other errors, an error message is displayed.
Fig.4-18:
Status line with informational message
In addition, there is also a status line with an advanced error message.
Fig.4-19:
Status line with advanced error message
The advanced error information can be retrieved by clicking the info symbol
respectively by pressing the "Info" key.
Bosch Rexroth AG
33/301
Operating Elements
Advertisement
