Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
<F2>
<F3>
Spindle +
Spindle -
F-keys global signals
<F2>
<F3>
F-keys combined display
10.5
Variable Lists and Parameter Lists
10.5.1
Usage
Categories and Subcategories
<F4>
<F5>
Fig.10-23:
F-keys spindle signals
Pressing <F2> or <F3> displays the interface of the next/previous spindle.
Pressing <F6> displays a dialog for selecting spindles.
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
.
<F4>
<F5>
Fig.10-24:
F-keys global signals
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
In the combined display, <F8> is also assigned to the "Signal type selection"
function. Pressing this key opens a dialog in which the signal types for the left
and right list can be selected.
The application shows selected variables and parameters in a pre-configured
list of 22 lines and 5 columns.
The values of these variables and parameters can be changed online within the
list.
Categories and subcategories of variables and parameters are shown in the
following table.
Symbol
Category
NC variables
PLC variables
Machine Parameters
Drive parameters
Fig.10-25:
Categories and Subcategories
<F6>
<F7>
Spindle -
Focus
Selection
Change
<F6>
<F7>
Focus
Change
Subcategory
CPL variables
SD variables
All data types
such as bool, integer etc.
All parameter types
Such as axis parameters, spindle param‐
eters, channel parameters
Data
Status
Bosch Rexroth AG
207/301
Diagnostics
<F8>
<F9>
Basic
Level
<F8>
<F9>
Basic
Level
Advertisement
