DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
10
Diagnostics
10.1
Diagnostic Display
10.1.1
Overview
Message list field (1)
Press <OP9> to activate the diagnostic display.
The delivery scope of IndraWorks HMI depends on the installed
control system. In contrast to the fact that the IndraMotion MTX
provides already existing screens to operate NC machines, an
IndraLogic control is only provided with the <OP9> key to which the
diagnostic call is assigned.
Fig.10-1:
Start screen of the diagnostics
The start screen of the diagnostics is divided into four areas:
The diagnostic messages of the assigned control (see header) are displayed
here. Listed are:
●
the message number
●
the existence of criteria analysis data (CA)
Bosch Rexroth AG
193/301
Diagnostics