Advertisement
66/301
Bosch Rexroth AG
General Operation and Visualization
File Functions
●
If the name entered already exists in the directory, an error message is
shown.
●
If the directory name has more than 30 characters and this directory is in
the directory system of the NC kernel, an error message is shown.
The root directory cannot be renamed!
In case of a multiple selection, directories cannot be renamed.
Copy
With this function, the currently selected directory is saved in the clipboard. This
function is required for the "Insert (Directory)" function. Only if an element of
the "Directory" type is in the clipboard, the function "Insert (Directory)" is acti‐
vated and can be selected by the user.
Every new copying process causes the current content of the clipboard to be
overwritten!
●
The "root" directory cannot be copied!
●
The return label cannot be copied!
●
A multiple selection of directories in the list is possible.
Insert
This function requires an element of the type "Directory" in the clipboard. Only
in this case, this function is active and can be executed by the user.
As soon as the function has been selected, the program determines the source
directory from the clipboard and copies the latter with all its subdirectories and
files in the currently selected target directory.
If a subdirectory with the same name of the directory to be copied already exists
in the target directory, the user has to decide by means of a dialog whether the
current directory is to be overwritten or whether the inserting process is to be
cancelled.
When inserting a directory with more than 30 characters from the Windows file
system into the file system of the NC kernel, an error message occurs.
Cut
Basic function like "Copy"!
In addition, the source directory is deleted after it has been inserted in another
directory via the function "Insert (Directory)".
These are functions which can only be used for files. This function is only pos‐
sible if one or several files are selected in the list. In case of multiple selection,
some functions are not possible!
File functions are only possible in the context "Program" or in the
IndraWorks Engineering.
New
This allows to create a new file of a certain type.
The following types are provided:
●
NC programs
●
NC variable list
●
D-corrections
●
Zero offsets
●
Placements
●
Text file
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Advertisement
