Advertisement
104/301
Bosch Rexroth AG
Operation Modes
Rexroth IndraMotion MTX 11VRS Standard NC Operation
"Calculation" Window
Fig.6-34:
Calculation
In this window, the values are displayed according to their settings and the
result is shown. Entering a distance can modify the result. The calculated value
is written to the CNC with "Save ZO".
Only the values shown (black) are considered for calculation. The other values
are grayed out.
Fig.6-35:
Two-point sampling
If the variant "Two-point sampling" is set, the "Calculation" window as well as
the respective F-key level are adjusted to these conditions.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
