Advertisement
212/301
Bosch Rexroth AG
Diagnostics
Open, Save As, Delete Dialog
Import and Export Dialog
Rexroth IndraMotion MTX 11VRS Standard NC Operation
The lists created are stored in the active project:
"...\ProjectName\VisualizationName\user\config\VarParLists".
The Open, Save and Delete dialogs are for file management. In the screen, the
Opendialog is shown. The dialogs Save As and Delete are structured in the
same way.
Fig.10-34:
Open dialog
The lists created can be exported from the active project into the file system of
the PC and from the file system into the active project.
Fig.10-35:
Export dialog
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
