Advertisement
258/301
Bosch Rexroth AG
Extended Functionality
11.4.3
Configuring Circle Test on F-Keys
11.5
I-Remote
11.5.1
Usage
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Fig.11-19:
Quadrant error correction
The circle test was not called in earlier projects. Proceed as follows to call it via
F-keys:
1. The following line has to be entered into the file HMI.ScreenData.XML:
<ScreenInfo Name="MtxCircularTest" ScreenType="MtxCircularTestAp‐
plication" Visible="true">
2. Find an empty F-key in the Engineering desktop and assign the "Circle
test" function to it (see IndraWorks documentation).
3. Assign the circle test to an operating range.
Open the HMI node context menu in the EDT and call "Update HMI da‐
ta". The entry for the circle test is shown in the screen list.
The screen can also be assigned to the desired operating range.
Go to the OP-panel editor, open the operating range editor and move the
circle test screen from the left into the right list.
With the help of the function "I-Remote", it is now possible to access remote
machine tool controls and to execute diagnostics or maintenance.
The I-Remote software consists of two components:
1. The "Client" software component on the IndraMotion MTX control system,
which has to be enabled via a valid license.
2. The "Control" software component on the remote "Service PC".
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
