Advertisement
128/301
Bosch Rexroth AG
Programming
Import Cycles
Rexroth IndraMotion MTX 11VRS Standard NC Operation
After pressing "Ok", a menu opens in which you specify the storage location
and the name of the export file with the extension "*.ncc".
Fig.7-5:
File name selection
In the export file created "*.ncc", all available files from the desired range can
be saved.
After pressing the F-key <F5 Import cycles, a menu is opened in which the file
to be imported (previously exported) with the extension "*.ncc" is selected.
Fig.7-6:
Selecting the cycle import file
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
