Advertisement
144/301
Bosch Rexroth AG
Programming
Start Editing Mode
Transferring a Value
Canceling Value Entry
Activate or Deactivate the Additive
Value Entry
Rexroth IndraMotion MTX 11VRS Standard NC Operation
– or –
●
Navigate with the <cursor> keys until the desired cell is selected.
– or –
●
Navigate using the F-keys (see also
Editor" on page
145).
The selected cell can be recognized from the dark blue background color.
Editing Values
Switching to the editing mode of the selected cell is carried out with one of the
following actions:
●
Entering a value or a character using the keyboard.
– or –
●
Press <Enter>.
– or –
●
Double-clicking the cell.
The editing mode is indicated by a flashing entry cursor in the respective cell.
An edited value can be applied with one of the following actions:
●
Press <Enter>.
– or –
●
Pressing the <Tab> key
– or –
●
Press the <Cursor> key.
– or –
●
Clicking on another cell with the mouse.
After the value has been transferred, the entered value is written directly to the
NC data table in the NC kernel.
If an incorrect value is entered, an error message is displayed in the
status line and the selected cell remains in the editing mode. The
entry can be cancelled or the value can be rewritten after correcting
the entry.
The editing mode can be cancelled at any time as follows:
Pressing <Esc>.
The original value is retained in the table.
Additive Value Entry
The "Additive value entry" mode is used to enter correction values that are
added to the existing value.
"Additive value entry" an be activated/deactivated as follows:
Press <F5 Additive> repeatedly until the desired mode is active.
A checkmark on the F-key indicates that the "Additive value entry" mode is
active.
The "Additive value entry" is not intended to be used for every cell.
Whether "Additive value entry" is active for the selected cell is in‐
dicated by the text "ADD" in the status line.
DOK-MTX***-NC*OP***V11-AP01-EN-P
chapter "function keys in the Table
Advertisement
