Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
F-keypad
<F2>
<F3>
level
Undo
Redo
Edit
Find...
Find Next
Navigate
Tools
Open Existing D-Correction Table
Open Active D-Correction Table
F4
<F5>
Copy
Replace
BoF
Fig.7-32:
function keys in the D-correction editor
Retrieving the D-Correction Editor
Any existing D-correction table can be opened in the operating area "Program
OP4" using the MTX Navigator or directly from a D-correction editor that has
already been started.
To open a D-correction table from the MTX Navigator:
1.
Call the MTX Navigator in the operating area "Program <OP4>".
2.
Open the desired D-correction table (file ending .dct) as follows:
Double-click on the table name with the mouse.
– or –
Select the table name and press <F6 Edit>.
– or –
Select the table name and select in the following menu item via the context
menu: Edit .
– or –
Select the table name and press <Enter>.
The selected D-correction table is opened in the D-correction editor.
To open an existing D-correction table from a D-correction editor that has al‐
ready been started:
1.
Switch to the 2nd F-keypad with <F8> and switch to the file functions with
<F2 File...>.
2.
Press <F3 Open....>.
A dialog opens in which the desired D-correction table can be selected.
3.
Acknowledge the selection of the D-correction table by pressing the
"Ok" button.
Another D-correction editor with the selected D-correction table opens.
The active D-correction table can be opened via the NC screen in the operating
area "Machine <OP3>".
1.
Open the NC screen in operating area "Machine <OP3>".
2.
Pres <F6 Active D-corrections>.
The D-correction editor with the active D-correction table opens.
If no D-correction table is active, a corresponding message appears
in the status line of the NC screen.
Create New D-Correction Table
A new D-correction table can be created either using the MTX Navigator or a
D-correction editor that is already open. By default, a newly created D-correc‐
Bosch Rexroth AG
<F6>
<F7>
<F8>
Paste
EoF
Previous
Next value
value
Options...
153/301
Programming
<F9>
Advertisement
