Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Application of the overview screens
Only after the start of the adjustment program, the adjustment information be‐
comes valid and the total adjustment is displayed as adjustment symbol next
to the partial window of the respective data type. From this point in time on‐
wards, the adjustment screens can be opened by the operator for the individual
data types. The adjustment symbol signalizes that the adjustment has not yet
been carried out. The symbol is removed after the adjustment has been suc‐
cessfully completed.
Fig.6-4:
Overview screen after the adjustment program started
When the adjustment of all data has been performed, the adjustment screen is
replaced by the automatic screen. The processing of the workpiece can be
continued.
Detailed information on the adjustment can be found in the adjustment screens
for individual data types. The adjustment screens are summarized in one ap‐
plication and can be opened with <F4> "Adjustment states" or via the machine
keys <L1> to <L5>.
The application comprises five adjustment screens:
●
Axes
●
Spindles
●
NC functions
●
Auxiliary Functions
●
Tools
It is switched between the screens via the keys <F2> to <F6> or via the machine
keys <L1> to <L5>. Exit the application with <F9>.
If all data was adjusted, the application is automatically closed.
Bosch Rexroth AG
81/301
Operation Modes
Advertisement
