Advertisement
206/301
Bosch Rexroth AG
Diagnostics
10.4.3
Operation and Navigation
Basic level of the F-keys
<F2>
<F3>
Channel -
Axis
Signals
Signals
F-keys channel signals
<F2>
<F3>
Channel +
Channel -
F-keys axis signals
<F2>
<F3>
Axis +
Axis -
F-keys spindle signals
The list on the left shows the NC→PLC signals while the one on the right shows
the PLC→NC signals for the selected signal group.
Each line in the list represents a signal. The signal numbering in the list starts
with 0.0.
The focused list is indicated by a blue frame.
Pressing <F6 Combined display> opens a list display to which the user can
assign any combination of signal types.
The operation is executed via F-keys and <Cursor> keys.
The <cursor> keys are used to scroll within the list.
The <cursor> keys always act on the focused list.
On the basic level, the signal group can be selected, a list can be focused and
the application can be closed.
<F4>
<F5>
Spindle -
Global
Signals
Signals
Fig.10-20:
Basic level of the F-keys
When a signal group is selected, the list is automatically focused and the as‐
sociated F-keypads are shown.
.
<F4>
<F5>
Fig.10-21:
F-keys channel signals
Pressing <F2> or <F3> displays the interface of the next/previous channel.
Pressing <F6> displays a dialog to select channels.
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
.
<F4>
<F5>
Fig.10-22:
F-keys axis signals
Pressing <F2> or <F3> displays the interface of the next/previous axis.
Pressing <F6> displays a dialog for selecting axes.
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
<F6>
<F7>
Combined
List
display
to focus
<F6>
<F7>
Channel -
Change focus
Selection
<F6>
<F7>
Axis
Focus
Selection
Change
<F8>
<F9>
Exit
Bit interface
<F8>
<F9>
Basic
Level
<F8>
<F9>
Basic
Level
Advertisement
