Advertisement
116/301
Bosch Rexroth AG
Programming
File - Exit NC Editor
Sequence
File - Exit All NC Editors
Process (for each editor window)
7.2.3
Functions under Edit...
Edit - Undo
Keyboard shortcuts
Edit - Redo
Keyboard shortcuts
Edit - Cut (Block)
Keyboard shortcuts
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Example:
Entry of a parameter: Printing date: #PRINT_DATE#
This function exits the open NC editor.
If the NC program opened by the user has been created, a dialog appears after
the "Save query " has been acknowledged where you can enter an identifier
and specify the storage location.
By default, the identifier is set to "NPG_ <time stamp>" (year/month/day_hour/
minute_second).
The "Save query " has three buttons.
●
"Yes"
saves the program and closes the editor,
●
"Cancel"
returns the user to the editor without saving,
●
"No"
rejects the file contents and closes the editor.
If a previously existing program containing unsaved changes is edited, a dialog
("Yes", "No", "Cancel") requests the user to decide whether he wishes to save
the changes made. The "Cancel" button aborts the "Exit" function.
If the "No" button is selected, the changes are discarded and the NC editor is
closed.
If the "Yes" button is pressed, the NC program is saved and the editor is closed.
If the NC program to be saved was selected, the program is automatically re‐
selected after saving.
This function closes all open NC editors.
If an NC program opened by the user contains unsaved changes, a dialog per
program is displayed, as in "Exit NC-Editor", requesting the user to decide
whether he wants to save the changes; in case of new programs the user is to
specify an identifier and the storage location in addition.
<Ctrl>+<Z>
This function permits the last 50 editing steps to be undone.
With this function, the modifications of individual lines can be undone (delete
line, paste line, editing procedures within a line, as well as cutting, pasting and
deleting blocks that cover one or more lines).
<Ctrl>+<Y>
This function permits redoing editing steps which have been undone.
<Ctrl>+<X>
The area selected is copied to the clipboard and deleted in the NC program.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
