Advertisement
192/301
Bosch Rexroth AG
System Switching
9.1.3
Operation and Navigation
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Fig.9-8:
Channel waiting states
The channel waiting states are displayed with <F2> or in a "tool tip" by moving
the mouse over the icon. The "tool tip" appears for approx. 10 seconds.
Operation is carried out via F-keys, <cursor> keys and <Enter>.
A channel window is always selected. The F-keys act on this channel window.
The channel is highlighted using the <cursor> keys or by clicking the mouse.
If there is not enough space to display channels, extra F-keys are displayed.
These can be used to quickly switch between the blocks.
<F8> is used to switch between the default and the compact display.
Pressing the <Enter> key or <F9> transfers the focused channel as the active
channel ("machine mode, machine status area"); the display immediately
switches to "machine" mode.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
