Advertisement
44/301
Bosch Rexroth AG
General Operation and Visualization
Program symbols
Displaying macro contents
5.2.6
Program Nesting Display
Display Content
Program symbols
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Fig.5-8:
Program section display
The following table describes the program symbols displayed.
Symbol
Meaning
Line stored Active NC program line
Fig.5-9:
Program symbols
If an NC macro was programmed in the NC block, currently hidden contents
can be shown by pausing the NC program, focusing the display and pressing
the <Display macro contents> button. The NC macros are displayed in color.
If the program is continued or the <Hide macro contents> button is confirmed,
the NC macro is hidden again.
To generally show the NC macro contents in the display, you have
to have the authorization for "Display macro contents". Whether the
content of certain NC macros really becomes visible, can be speci‐
fied with read-only rights (technology protection). For additional
information, please refer to the respective documentation.
The program nesting display shows the subroutine nesting, including the re‐
trieving of the line numbers and the active NC block.
Fig.5-10:
Program nesting display
The following table describes the program symbols displayed.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Note
Indicates the NC command line currently
processed by the NC.
Advertisement
