Advertisement
252/301
Bosch Rexroth AG
Extended Functionality
Configuration of the Power Monitor - General
11.3.3
Working with the Power Monitor
Starting the Power Monitor
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Fig.11-14:
Configuration of the power monitor - General
Under "General", the maximum total drive power and the maximum single drive
power have to be entered. Additionally, the display sequence of the drives as
well as of the auxiliary equipments can be specified for the different power dis‐
plays using the arrow keys if required.
In the basic default screen, the power monitor can be shown via the second F-
key level with <F7> and <F3> if required.
The power monitor can also be configured in the user screens on F-keys or M-
keys.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Advertisement
