48/301
Bosch Rexroth AG
General Operation and Visualization
5.2.14
Precision Correction Display
Display Content
5.2.15
Online Correction Display
Display Content
5.2.16
G Code Display
Display Content
5.2.17
M Code Display
Display Content
Rexroth IndraMotion MTX 11VRS Standard NC Operation
●
Length correction L1
●
Length correction L2
●
Length correction L3
●
Radius correction R
●
Euler angle phi
●
Euler angle theta
●
Euler angle psi
●
Edge position
The display supports a maximum of 10 variants.
If a date is not available, "—" is displayed.
The precision correction display is used to display the precision corrections and
compensations effective in the ACS.
●
Command position
●
Actual position
●
Temperature NC
●
Lead screw pitch
●
Sag
The display supports a maximum of 10 variants.
If a date is not available, "—" is displayed.
The online correction display is used to display the precision corrections and
compensations acting in the WCS.
●
Command position
●
Handwheel
The G-code display shows active G-codes.
Fig.5-19:
G-code display
The M-code display shows active auxiliary functions (M-codes).
DOK-MTX***-NC*OP***V11-AP01-EN-P