Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
4.4
Operating Areas and OP keys
(1)
Machine status area
(2)
M-key visualization - left side, primarily assigned with NC functions (e.g.
switching between operating modes)
(3)
M-key visualization - right side, primarily assigned with machine func‐
tions (e.g. axis selection for jogging)
(4)
F-key visualization - assigned with applications and functions for oper‐
ating the interface (e.g. editors)
(5)
OP key visualization - assigned with functions for switching between
operating areas
(6)
Scope of Application
(7)
Status line
Fig.4-4:
Screen structure
The complete functionality of the MTX user interface are divided into 8 task-
oriented operating areas.
There are specific applications within these operating areas.
Each application is assigned to precisely one operating area. This assignment
can be changed via configuration (see MTX documentation "Startup").
Each operating area has a start application that cannot be terminated.
The operating area "Machine" is active whenever the control system is switched
on.
Bosch Rexroth AG
27/301
Operating Elements
Advertisement
