Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
9
System Switching
9.1
Channel Dialog
9.1.1
Usage
Integration of the channel dialog in
the user interface
9.1.2
General Structure of the Channel Dialog
The channel dialog has two tasks:
●
Switching between operation and display channels
●
Display the selected channel information of all channels of a control (chan‐
nel overview).
Channels hidden via the configuration are not shown.
Fig.9-1:
Channel dialog in the user interface
The channel dialog is an application with individual F-key assignment.
The menu and the headline are hidden.
The channel dialog is opened via the <OP6> "System" key.
The M-keys act as "global M-keys" on the channel that is displayed in the ma‐
chine status area (active channel).
Depending on the number of channels, two displaying variants are possible.
If more channels exist than can be displayed in the default setting, a compact
display is also provided.
Bosch Rexroth AG
189/301
System Switching
Advertisement
