DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
More Information
10.5.3
Operation and Navigation
Entry of Values
●
Subcategory
●
Identifier
●
Value
●
Comment
Each of the 22 lines can be assigned with a variable or a parameter.
If there is further information for cell contents available, the cell is marked with
a red triangle. The information is displayed when moving over the element with
the mouse or selecting the cell with the cursor keys via tooltips and status bar.
Machine parameters contain the following further information:
●
Macoda ID
●
Parameter designation
Fig.10-28:
Display of further information for machine parameters
Drive parameters contain the following further information:
●
Parameter designation
●
Unit
●
Minimum value
●
Maximum value
●
Attribute
Fig.10-29:
Display of further information for drive parameters
If a text in a line is too long, it is cut off ("...") and marked and displayed as
further information.
If a variable or parameter is entered in the list but no longer existing in the active
project, the value is marked with "???" and referred to in the further information.
It is operated via F-keys and cursor keys.
The cursor keys are used to navigate between the cells within the list.
Editable cells on which the focus is placed are in dark blue.
An editable cell becomes an entry field with the entry of a value, press <Re‐
turn> or double-click with the mouse.
The value entered is accepted with <Return> and transferred to NC, PLC or
drive.
Bosch Rexroth AG
209/301
Diagnostics