Advertisement
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Function key
Operating and Inserting Values
Possibilities of inserting results
Pasting from the clipboard
Direct pasting
The defined shortcut is project-independent and applies to the respective in‐
stallation of the user interface.
In addition to the shortcut, you can optionally set up F-keys and/or M-keys to
activate the "Calculations and tables" dialog via buttons. For this setting, the
IndraWorks Engineering is to be used and the active project is to be adjusted
accordingly. As graphics on the configured keys, the "Calc.gif" file can be used.
Fig.11-22:
Setting up an M-key to call the calculator
There are two possibilities to transfer results to input fields and/or editors:
●
by pasting from the clipboard and
●
by direct pasting to an editing field when closing the calculator.
If a value shown in the calculator is selected for transfer by using the "Copy"
key, it is automatically available for pasting at any place in the clipboard, irre‐
spective whether within or outside the calculator after closing it (e.g. in an
editor). The result is pasted using <Ctrl>+<V> and/or an equivalent F-key to
paste from the clipboard. The usage of the clipboard is the most universal op‐
eration to transfer a result and is generally possible in all text editors and text
boxes. This way of pasting is always available.
The direct pasting of values reduces the number of operations and presumes
that
Bosch Rexroth AG
261/301
Extended Functionality
Advertisement
