Nortel DMS-100 Series Maintenance Manual page 582

13-24 Star Remote System routine maintenance procedures
Heaters test
SRMO
(end)
Heaters test
At the SRMO site
1
2
3
4
297-8353-550 Standard 05.01 March 2001
Cool the low temperature sensors with a cooling spray. The battery
temperature sensor is to the right of the battery compartment at the bottom
of the SRMO cabinet. The cabinet low temperature sensor is in the dc panel.
Check that the battery heater element is ON. Check that the heater element
located in the fan and heater cage is ON.
If the heater elements
warm
do not warm
Contact your maintenance support group.
You have correctly completed this procedure.
Do
step 4
step 3