Nortel DMS-100 Series Maintenance Manual page 197

Table 6-18 LTPLTA level commands (Sheet 2 of 2)
Command
VAC (and VAC C)
RES (and RES C)
CAP (and CAP C)
HOLD
NEXT
LTA
BALNET
COIN
RING
DGTTST
Note 1: MONLTA and TALKLTA are also supported for POTS and COIN lines through a pulse-code
modulation (PCM) connection, where they are not configuration dependent. The ORIG command
cannot be used with a PCM MONLTA or TALKLTA connection.
Note 2: The LMU in the Star Module only supports one metallic connection that is connected to all
64 lines. MONTALK is not supported in the LMU and therefore other commands that require the
MONTALK connection such as RING, ORIG, DGTTST, and TALKLTA are not supported.
LTPISDN level
The following table contains a list of LTPISDN commands. LTPISDN level
commands are used to monitor and maintain ISDN lines. When the command
is supported by POTS, coin, and ISDN lines, the word All appears in the Line
types column.
Table 6-19 LTPISDN level commands (Sheet 1 of 3)
Command Supported?
QUIT Yes
POST Yes
SUSTATE Yes
BCHCON Yes
LTLOOPBK No
Supported by Supported by
Star Hub? Star Module?
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No (note 2)
Yes No (note 2)
Line types
ISDN
ISDN
ISDN
ISDN
ISDN
DMS-100 Family NA100 Star Remote System XPM15 and up
Star Remote System user interface 6-37
Line types
All
All
All
All
All
All
All
Coin
POTS, Coin
POTS, Coin
Configuration
dependent?
No
No
No
No
No
Configuration
dependent?
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes