Nortel DMS-100 Series Maintenance Manual page 383

22 If you were directed to this procedure from an alarm clearing procedure in this
manual, return now to the alarm clearing procedure that directed you here.
Otherwise, continue with step 23.
At the MAP terminal
23 Determine which procedure to use to return the line subgroups to service.
If the card you are replacing is
NT6X54AA
NT6X54DA
24 To return the line subgroups to service, type
>RTS DRWR
and press the Enter key.
where
lsg
is one of two line subgroups (0 through 35) associated with the drawer
Note: Repeat this step for the other line subgroups associated with the
line drawer.
If RTS
passed
failed
25 To return the line subgroups to service, type
>RTS DRWR
and press the Enter key.
If RTS
passed
failed
26 Send any faulty cards for repair according to local procedure.
27 Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 29.
28 Get additional help replacing this card by contacting the personnel
responsible for higher level of support.
Star Remote System card replacement procedures
lsg
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
Do
step 24
step 25
Do
step 26
step 28
Do
step 26
step 28
12-35
NT6X54
(continued)