Supported Subscriber Line Types - Nortel DMS-100 Series Maintenance Manual

5-10 ESA maintenance overview
ESA office parameters
The following office parameters are required to define ESA functionality in the
Star Hub:
•
•
•
•
•
•
These office parameters are discussed in detail in Extended Peripheral Module
Translations Reference Manual, 297-8321-815.
Downloading data to the Star Hub ESA
Translation data is downloaded to the Star Hub ESA as follows:
•
•
•

Supported subscriber line types

When the Star Hub is in ESA mode, the supported subscriber line types are
POTS and MDC.
POTS line types
The supported POTS line types include the following:
•
•
•
297-8353-550 Standard 05.01 March 2001
RLCM_ESAENTRY_BADCSIDE
RLCM_ESAENTRY_BADLINK
RLCM_XPMESAEXIT
RLCM_ESADUPD_BOOL
RLCM_ESADUPD_HOUR
RLCM_ESA_NOTIFY_TONE
manually, using the LOADPM command as presented in the following
examples:
— LOADPM PM CC ESADATA
— LOADPM UNIT 0 CC ESADATA
— LOADPM UNIT 1 CC ESADATA
during return to service (RTS)
automatically during periods of low traffic. This period is set with the
following office parameters
— RLCM_ESADUPD_BOOL (can be set to Y)
— RLCM_ESADUPD_HOUR (the default is 04:00)
Because the period of low traffic is 04:00, this period is called the nightly
audit.
1FR - single party flat rate
1MR - single message rate. The lines are considered a single party flat rate
line.
2FR - two parties flat rate