Tstequip Level User Interface; Ump Level - Nortel DMS-100 Series Maintenance Manual

Table 6-11 Overview of RLDCarr;POST commands (Sheet 2 of 2)
Command Function
TST Test
TRNSL Translate

TSTEQUIP level user interface

The MTCNA level contains the TSTEQUIP level. The TSTEQUIP level is
used to display and post stand-alone test equipment such as the following
cards:
•
•

UMP level

Posting the UMP card takes you to the UMP level where maintenance
activities such as BSY, RTS, and LOADTE are performed. In addition,
diagnostics are performed at the UMP level. The following figure provides an
example of a UMP card posted at the UMP level.
Description
Tests the DS-1 interface card for a specific Star Hub P-side
DS-1 carrier and enables or disables alarm detection for a
specific DS-1 link.
Displays the carrier status, message condition, port number
on the Star Hub, port number on the Star Module, and the
master Hub unit for all (up to 32) P-side DS-1 links of a
specified Star Hub.
NTTR73AA UMP card in the Star Hub is posted at a UMP sublevel
NTTR71AA LMU card in the Star Module is posted at the LMU sublevel
DMS-100 Family NA100 Star Remote System XPM15 and up
Star Remote System user interface 6-27