Nortel DMS-100 Series Maintenance Manual page 175

When the command string QUERYPM FLT is entered and the ILDs status is
ISTb or SysB, the ISTb/SysB reasons are displayed. The following is a list of
the possible ISTb or SysB reasons.
• ISTb reasons
— one DMSX channel is unavailable
— incoming message overload
— load name mismatch
— noncritical inservice test failed
— one or both Bd-channels are out of service
— invalid load file
— load in progress
• SysB reasons
— incoming message overload
— critical inservice test failed
— no response from ILD-R
— call process activity mismatch
— LCM activity mismatch
— unsolicited message limit exceeded
— software error message limit exceeded
— who-am-I (WAI) received
— cold Swbnk in progress
— CC restart has occurred
— C-side node return to service (RTS)
— active bank mismatch
— ILD bus interface card (BIC) loop failure
— fault message received from ILD
When the command string QUERYPM CNTRS is entered, the following
ILD-R information is displayed:
• loadnames of the active and inactive banks
• number of unsolicited messages and swerrs received and their limits
• contents of the ILDMSGCNT's registers
Star Remote System user interface 6-15
DMS-100 Family NA100 Star Remote System XPM15 and up