Nortel DMS-100 Series Maintenance Manual page 497

At the MAP terminal
16 To return the RLD to service, type
>RTS DRWR
and press the Enter key.
If RTS
passes
fails
17 Send any faulty cards for repair according to local procedure.
18 Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 20.
19 Get additional help replacing this card by contacting the operating company
personnel responsible for a higher level of support.
20 You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in an RLD
Do
step 17
step 19
12-149
NTTR72
(end)