Nortel DMS-100 Series Maintenance Manual page 438

12-90 Star Remote System card replacement procedures
NTMX81
in a STAR
(continued)
9
10
297-8353-550 Standard 05.01 March 2001
LINK 0: STAR REM1 00 0 0;CAP
LINK 1: STAR REM1 00 0 1;CAP
LINK 2: STAR REM1 00 0 0;CAP
LINK 3: STAR REM1 00 0 1;CAP
LINK 4: STAR REM1 00 0 0;CAP
LINK 5: STAR REM1 00 0 1;CAP
LINK 6: STAR REM1 00 0 0;CAP
LINK 7: STAR REM1 00 0 1;CAP
Record the numbers of the links with status not OK.
After identifying the link with faults, use the following chart to determine which
NTMX81 to remove by matching the STAR link number with the slot number
and the packlet number to the left of the table.
C-side link number
Slot 8
0
0
2
4
1
6
8
2
10
12
3
14
NTMX81 packlet slot number in the NTTR87 card
located in the specified card slots.
To manually busy the links connected to the card with faults, type
>BSY LINK link_no
and press the Enter key.
where
link_no
is the number of the link connected with the NTMX81 card withfaults,
from step 9
Note: Each NTMX81 card has two links connected to it. Each link must
be manually busied. Possible link number pairs are as follows: 0,2; 1,3;
4,6; 5,7; 8,10; 9,11; 12,14; or 13,15.
Go to step 17.
MS:STATUS OK
MS:STATUS SBsy MSGCOND: CLS
MS:STATUS OK
MS:STATUS OK
MS:STATUS OK
MS:STATUS OK
MS:STATUS SBsy MSGCOND: CLS
MS:STATUS OK
Slot 16
1
3
5
7
9
11
13
15
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
0
NTMX81
1
packlets
2
3
NTTR87 card