Nortel DMS-100 Series Maintenance Manual page 541

19 Replace the NTMX81 packlets previously removed. Align the packlet with the
slots in the shelf. Carefully slide the packlet into the circuit card slot in the
NTTR87 circuit card.
20 Seat and lock the packlet.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate of the packlet to ensure the packlet is fully seated in the slot.
b Close the locking lever.
21 Use the following information to determine the next step in this procedure.
If you entered this procedure
from
alarm clearing procedures
other
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
Do
step 33
step 22
12-193
NTTR87
(continued)