Nortel DMS-100 Series Maintenance Manual page 302

11-36 Star Remote System alarm clearing procedures
PM STAR
major
(continued)
16
17
18
297-8353-550 Standard 05.01 March 2001
link_no
is the number of the P-side link busied in step 13
If RTS
passes and no other links are
SysB and the alarm remains
passes and the alarm clears
passes but other links are SysB
fails
To post the STAR with the alarm condition, type
>POST STAR site frame unit
and press the Enter key.
where
site
is the site name of the STAR (alphanumeric)
frame
is the frame number of the STAR (0-511)
unit
is 0 for the STAR
CAUTION
Failing to allow sufficient time may cause false alarm indication.
Allow 3 to 5 minutes for the system to clear the alarm before
proceeding to the next step.
To busy the STAR unit associated with the alarm, type
>BSY UNIT star_unit
and press the Enter key.
where
star_unit
is the STAR unit to be busied (0 or 1)
To test the busied unit, type
>TST UNIT star_unit
and press the Enter key.
where
Do
step 16
step 29
step 13
step 27