Nortel DMS-100 Series Maintenance Manual page 536

12-188 Star Remote System card replacement procedures
NTTR87
in a STAR
(continued)
9
10
At the MAP terminal
11
297-8353-550 Standard 05.01 March 2001
Record the numbers of the links with status not OK.
After identifying the link with faults, use the following chart to determine which
NTTR87 card to remove by matching the provisioned link number with the slot
number and the packlet number to the left of the table.
C-side link number
Slot 8
0
0
2
4
1
6
8
2
10
12
3
14
NTMX81 packlet slot number in the NTTR87
card located in the specified card slots.
To manually busy the links connected to the NTTR87 card with faults, type
>BSY LINK link_no
and press the Enter key.
where
link_no
is the number of the link connected to the NTTR87 card with faults
Note: All provisioned links in the slot must be busied.
Go to step 17.
To access the RLDCarr level and display the C-side links from all RLDs to the
posted STAR, type
>RLDCARR;TRNSL
and press the Enter key.
Example of a MAP display:
Slot 16
1
3
5
7
9
11
13
15
0
NTMX81
1
packlets
2
3
NTTR87 card