Nortel DMS-100 Series Maintenance Manual page 310

11-44 Star Remote System alarm clearing procedures
PM STAR
minor
(continued)
Clearing a PM STAR minor alarm
At the MAP terminal
1
2
3
4
5
297-8353-550 Standard 05.01 March 2001
If alarm is still audible, silence it. To silence the alarm, type
>MAPCI;MTC;SIL
and press the Enter key.
To access the PM level of the MAP display, type
>PM
and press the Enter key.
To identify the STAR with faults, type
>DISP STATE ISTB STAR
and press the Enter key.
To post the STAR with the alarm condition, type
>POST STAR site frame unit
and press the Enter key.
where
site
is the site name of the STAR (alphanumeric)
frame
is the frame number of the STAR (0-511)
unit
is 0 for the STAR
To determine the fault indicators, type
>QUERYPM FLT
and press the Enter key.
If the fault indicated is
ringing generator
CBsy (C-side busy)
DRWR FLT (drawer fault)
ISTb (In-service trouble)
one or both universal mainte-
nance packs (UMP) are out of
service
Do
step 6
step 10
step 16
step 49
step 53