Nortel DMS-100 Series Maintenance Manual page 173

The following table provides an alphabetical list of the menu commands
related to the ILD.
Table 6-6 Overview of ILD commands (Sheet 1 of 2)
Command Function
BSY Busy
LIST_SET Lists posted set
LOADPM Load PM
NEXT Next
OFFL Off line
POST Post
QUERYCH Query channel
QUERYPM Query PM
RTS Return to service
SWBNK Switch memory
bank
TRNSL Translate
TST Test
Star Remote System user interface 6-13
Description
Moves the ILD-R or Bd-channel to ManB.
Displays the ILD-Rs included in the posted set.
Loads the ILD-R. Used to load either a single drawer
(LOADPM) or all the drawers on the same Star Hub
(LOADPM ALL). The steps of the LOADPM procedure, and
the amount of memory already loaded will appear at the MAP
display during the LOADPM command.
Displays the next ILD-R in the post set.
Moves the ILD-R or Bd-channel to offline (Offl).
Posts one or all ILDs located in the same Star Hub. When
POST ALL is invoked, all ILD-Rs located in the Star Hub (up
to six) are added to the list.
Displays information about the Bd-channel. It displays the
XLIU/XSG number and channel of the Bd special connection,
the Bd-channel, and the ILD-R BD operational measurement
(OM) index.
Displays information about the ILD-R. Two optional
parameters, FLT and CNTRS can be used.
Returns to service the ILD-R or a Bd-channel.
Switches activity between the two flash memory banks.
Currently, only cold switch bank is supported.
Displays the ILD-Rs C-side links with their status and
message condition.
Tests the ILD-R or its Bd-channels. When BD1 or BD2 is
typed, a continuity test between the ILD-R and the packet
handler is performed. The test sends a message at the
ILD-R, loops it at the integrated packet handler (IPH), and
verifies it again at the ILD-R.
DMS-100 Family NA100 Star Remote System XPM15 and up