6
To busy the line, type
>BSY
and press the Enter key.
At the STAR site
7
Go to the common replacing a line card procedure in this document. When
you have completed the procedure, return to this point.
At the MAP terminal
8
To test the line card just replaced, type
>DIAG
and press the Enter key.
If the DIAG
passes
fails
9
To return the line card to service, type
>RTS
and press the Enter key.
If RTS
passes
fails
10
Send any faulty cards for repair according to local procedure.
11
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
indications that prompted replacement of the card
Go to step 13.
12
Get additional help in replacing this card by contacting the personnel
responsible for a higher level of support.
13
You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR or RLD
Do
step 9
step 12
Do
step 10
step 12
12-21
NT6X21
(end)