Nortel DMS-100 Series Maintenance Manual page 555

Line cards
Line drawer
Thumb-latch button
4 Remove the line card to be replaced by using the following steps:
a Slide a card shroud over the card to be removed and an adjacent card.
(If there is not an adjacent card on either side, do not use the card
shroud.)
b Grasp the edge of the card with a line card extractor at a point midway
between the top and bottom edges. Hold the extractor in your right hand.
c Squeeze the handles of the extractor together to grasp the card tightly.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
Replacing a line card
STAR or RLD
(continued)
12-207