Nortel DMS-100 Series Maintenance Manual page 501

At the MAP terminal
10 To test the new UMP card, type
>TST
and press the Enter key.
If TST
fails
passes
11 To return the new UMP card to service, type
>RTS
and press the Enter key.
If RTS
fails
passes
12 Send any faulty cards for repair according to local procedure.
13 Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Proceed to step 15.
14 Get additional help replacing this card by contacting the personnel
responsible for a higher level of support.
15 You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
Do
step 14
step 11
Do
step 14
step 12
12-153
NTTR73
(end)