Nortel DMS-100 Series Maintenance Manual page 341

unit_no
is the number of the ISTb STAR unit.
10 To test the ManB STAR, type
>TST UNIT unit_no
and press the Enter key.
where
unit_no
is the number of the ManB STAR unit.
If cardlist
generate
does not generate and the alarm
is still present
11 Observe the card listing shown on the MAP display.
Example of a MAP response:
SITE FLR RPOS BAY_ID
REM1 01 A00
REM1 01 A00
12 Determine if the NTTR60 circuit card was replaced.
If the NTTR60 card has
been replaced and the alarm is
still present
not been replaced
13 To return the STAR unit to service, type
>RTS UNIT unit_no
and press the Enter key.
where
unit_no
is the number of the ManB STAR unit (0 or 1).
If
RTS PASSED
RTS FAILED
Star Remote System alarm clearing procedures
SHF DESCRIPTION SLOT EQPEC
SRHE 00 37
SRHE 00 37
DMS-100 Family NA100 Star Remote System XPM15 and up
PM STAR RG
major, minor
Do
step 11
step 19
STAR:000 :01
STAR:000 :15
Do
step 19
step 18 to replace the ringing
generator
Do
step 14
step 19
11-75
(continued)
TR60
TR77